[Orcnet] 165C -- anybody got _really_ high temp circuit experience?
Brian Conley
hiker26 at ix.netcom.com
Fri Oct 22 17:54:07 UTC 2010
Related Sidebar Information:
Back in 1984 when I was taking my comprehensive exam for my masters I was asked
several questions about triodes.
This surprised me because all of my physical device theory up to that point had been
solid state.
The reason I was asked is that University of Arizona had some sort of grant
from an undisclosed agency to develop "Thermionic Integrated Circuits",
essentially chip vacuum tubes or vacuum tubes on a chip.
The reasons were for the conditions you describe.
Perhaps this can give you two other things to search on.
(U of A & Thermionic ICs)
-----Original Message-----
>From: Steve Wetterling <stevewetterling at comcast.net>
>Sent: Oct 22, 2010 10:02 AM
>To: 'Tim Wescott' <tim at wescottdesign.com>, 'orcnet' <orcnet at eeconsult.org>
>Subject: Re: [Orcnet] 165C -- anybody got _really_ high temp circuit experience?
>
>The Anadigm switched capacitor analog signal processor IC is represented to
>be particularly well suited to high temp environments like this based on
>existing successful applications. What kind of analog frequencies are being
>talked about? The Anadigm technology is good for milli-Hertz bandwidths at
>very low frequencies.
>
>Please tell me more.
>
>Steve Wetterling
>Cell 503-860-5594
>
>
>-----Original Message-----
>From: orcnet-bounces at eeconsult.org [mailto:orcnet-bounces at eeconsult.org] On
>Behalf Of Tim Wescott
>Sent: Friday, October 22, 2010 9:49 AM
>To: orcnet
>Subject: [Orcnet] 165C -- anybody got _really_ high temp circuit experience?
>
>I've got a prospect who wants some work done, combining software,
>hardware, and signal processing. The business end of this is going to
>be down in an oil well, where things are hot. It needs to work at 150C,
>and he likes to test things at 165C. Furthermore it's attached to a
>drilling head, so it's a high vibration/shock environment. There are a
>lot of kinks and quirks to this (not least of which is using off the
>shelf components well beyond their maximum ratings).
>
>I'm figuring that I'll be doing the signal processing and possibly the
>firmware. But I don't think the customer is going to be eager to pay me
>to learn how to do the high-temp circuit design. So if you have similar
>high temperature circuits experience, or if you know someone who has,
>let me know or point them to me.
>
>Thanks in advance.
>
>--
>Tim Wescott
>Wescott Design Services
>Voice: 503-631-7815
>Cell: 503-349-8432
>http://www.wescottdesign.com
>
>
>_______________________________________________
>Orcnet mailing list
>Orcnet at eeconsult.org
>http://eeconsult.org/mailman/listinfo/orcnet
>
>
>__________ Information from ESET Smart Security, version of virus signature
>database 5555 (20101022) __________
>
>The message was checked by ESET Smart Security.
>
>http://www.eset.com
>
>
>
>__________ Information from ESET Smart Security, version of virus signature
>database 5555 (20101022) __________
>
>The message was checked by ESET Smart Security.
>
>http://www.eset.com
>
>
>_______________________________________________
>Orcnet mailing list
>Orcnet at eeconsult.org
>http://eeconsult.org/mailman/listinfo/orcnet
Brian Conley, PE
Circuitsville Engineering LLC
www.circuitsvilleeng.com
Voice - 503-530-6520
FAX - 503-574-2066
bconley at circuitsvilleeng.com
More information about the Orcnet
mailing list